image
Our range of drop-bottom furnaces is known to offer quality in budget.

The drop bottom furnace is electrically heated as well as considered for setting up above the floor level. We at Maharith Thermal, the best Electric furnace manufacturer, deliver you the best quality of Drop bottom furnace at affordable prices. Well, the combination of Drop bottom features makes this furnace the perfect equipment for batch solution heat treating of castings, forging as well as other aluminum parts.

Mail Now: [email protected]

Leading Manufacturer and Suppliers In India

Moreover, Maharith Thermal Pvt. Ltd. is at the top in the list of industries, because we design furnaces with the superlative quality material to build the long-running life of furnaces. We manufacture the furnace as per the customer’s choice with an effective and sturdiness furnace.

Drop bottom furnaces are in usage for the ultimate solution heat treatment of aluminum alloys. These furnaces are manufactured to function with fixed uniformities from 150°C to 650°C for maximum elasticity to allow for annealing. These furnaces situate at the bottom so that a quench tank can be located directly below the furnace. However, for the quenching procedure, the furnace bottom moves straight to the side.

Get More

Find Out Features & Applications

01

Salient Benefits

  • Matches airflow requirements based on product load and arrangement
  • Instant door opening system
  • Low maintenance cost
  • Reduces the number of joints
  • Delivers the most favorable results
  • Reliable and energy-efficient

Know More

Buy Drop Bottom Furnace At Reasonable Cost!

To sum up, we trust in keep track of higher market development. In addition to this, we are occupied in delivering an exclusive range and the ultimate Drop Bottom Furnaces exporter. Further, all of our furnaces are well known for their accurateness, dependability, as well as high performance. To know more information about the best deals, call us today!

Call Now: +91-9444063455

Frequently Asked Questions (FAQs)

What exactly is a drop bottom furnace and what is it used for?
It is a furnace that sits above a quench tank. Once the aluminum parts inside are heated to the right temperature, the bottom of the furnace opens and the load drops directly into the quench tank below. The whole point is speed. Getting the hot metal into the quench liquid within seconds is what locks in the mechanical properties of the material. It is the standard equipment for solution heat treatment of aluminum alloys, castings, and forgings.
Aluminum alloys lose their heat quickly, and if they cool even slightly in the air before hitting the quench, the metallurgical properties you worked to achieve during heating start to degrade. For thin aluminum sheets and components, the transfer needs to happen within 5 to 7 seconds. Thicker castings can tolerate 15 to 20 seconds. A drop bottom furnace is specifically designed to meet those tight transfer times because no other batch furnace design can do it consistently.
Our furnaces operate between 150°C and 650°C. That covers the full range needed for aluminum alloy solution heat treatment and annealing. Every part in the batch reaches the right temperature, not just the ones nearest the heating elements. Uniformity across the load is maintained throughout, which is what makes the results consistent batch to batch.
Two things to start with. The size and weight of the parts you need to treat in one cycle, and how many cycles you need to run per shift to hit your production targets. The chamber needs to fit the load without blocking airflow, and the quench tank below needs to handle the heat from each batch without the quench medium overheating. Share your part dimensions, batch weights, and production volume with us and we will work out the right size for you.
Yes, it can be set up for fully automatic or semi-automatic operation. The door opening, basket lowering, and cycle timing all run without operator involvement. That matters because transfer timing directly affects part quality. A second or two of variation across batches shows up in the mechanical properties of the finished parts. Automation removes that variable and keeps every batch consistent.
The furnace is primarily designed for aluminum alloys — castings, forgings, sheets, tubes, and extrusions. Magnesium alloys can also be processed in certain configurations. For materials outside of aluminum and magnesium, a different furnace type is generally more appropriate. If you are unsure whether your material suits this furnace design, tell us what you are working with and we can advise.
Both achieve the same result, but electric heating is preferred when the material being processed cannot come into contact with combustion products. Some aluminum alloys require that the heating environment is completely clean. An electrically heated furnace, or an indirect gas-fired design where the burner fires through a heat exchanger, keeps combustion gases away from the load entirely. Direct gas-fired designs are more common in applications where combustion product contact is not a concern.
The moving parts — door mechanism, hoist, and basket lifting system — need regular lubrication and inspection. Check seals and lifting components on a fixed schedule, not just when something looks wrong. The quench tank needs attention too. The fluid temperature needs to be controlled, the medium needs to be agitated during quenching, and it needs to be tested and replaced periodically. Consistent cooling rates batch to batch depend on the quench medium being in good condition. Skip that and the results become unpredictable.
A few things help us give you an accurate recommendation quickly. The type and grade of aluminum alloy you are processing, the size and weight of the parts per batch, your required temperature range, how many batches per shift you need to run, your available floor space and whether there are any ceiling height restrictions, and whether you need the system to meet any specific industry standards. The more detail you share upfront, the faster we can match you to the right furnace size and configuration.
Contact Us
Get A Free Quote For
Any Enquiry

If you’ve got questions or ideas you would like to share, send a message. For anything more specific, please use one of the addresses listed below.

Office Address

Old No. 2/73, New No. 3/849, Bye Pass Road, Devi Kalyana Madnadapam Complex, Sennerkuppam, Poonamallee Chennai, Tamil Nadu, India – 600056

24x7 SUPPORT

+91-9444063455

Email Address

[email protected]

Reach Us
Send a message