An industrial oven is a piece of equipment used to bake, dry, cure, heat treat, and perform other processes on huge quantities of materials. It has a big studio capacity and a powerful heating system that transmits heat swiftly and evenly to the material’s surface, allowing for quick, efficient heating and manipulation. Industrial Ovens typically consist of a heating system, a circulating fan, a control system, a studio and an inlet and outflow device. Heating systems often use electric heating elements, gas furnaces or steam heating to heat the air to a specific temperature. The circulating fan may circulate hot air increasing thermal efficiency and baking effectiveness.

Here are Some Most Common Industrial Oven Issues and Their Solutions

Problem: Inconsistency in Temperature Control

Solution: Examine the temperature controller’s operation and the sensor’s location to determine whether either one is broken or needs to be replaced. Regulating the temperature control parameters or replacing or fixing the affected parts are two possible solutions to the issue.

If the temperature is excessively high or low, make sure the device’s heating power satisfies the specifications and that no heating parts need to be replaced. The device’s heating power and temperature can be changed, and its heating parts can be changed as needed.

Problem: Unequal heating treatment

To ensure that the equipment’s parts are heated equally, examine the heater’s operation and position to determine whether the heater’s heating time and position need to be changed.

Problem: Improper oven door sealing

Solution: Must check that how well the oven door seals to determine whether the sealing strips need to be changed or are getting old. One possible solution to the issue is to readjust the oven door or replace or service the affected parts.

Problem: Troubleshooting

Solution: In case of excessive noise from the device, verify that the power voltage and ground cable are within normal limits. Additionally, determine if the heater or blower has to be changed if they are malfunctioning. 

In addition to the above, the north and south sides serve as reminders that industrial ovens must be calibrated and maintained regularly. At the same time, it is vital to clean the inside of the equipment regularly, inspect the performance and condition of the heater, controller, sensor, and other equipment, and replace or repair any faulty parts as soon as possible. Furthermore, it is advised that the equipment be maintained by the manufacturer’s operation handbook and maintenance guidelines to guarantee long-term steady operation.

How To Care For Your Commercial Oven

When you’ve worked in a commercial kitchen or food service facility for a long time, understanding how an oven works becomes second nature. However, it is critical to always read the equipment handbook; each model is unique, and a quick fix that works for one machine may not be appropriate for another. In addition, you must follow routine oven maintenance protocols. To keep your oven from breaking down, we recommend cleaning it daily as well as scheduling a monthly deep clean and professional examination.

Maharith Thermal Private Limited

Maharith Thermal Pvt Ltd is known for its expertise in Industrial heater and Industrial Oven manufacturing. We fabricate high grade and energy efficient furnaces to meet research and industrial requirements.